Grades and properties of tungsten carbide drawing dies
| Grade |
Density(g/cm³) |
Hardness(HRA) |
TRS(MPa) |
Applications recommended |
| YG6X | 14.95 | 91.5 | 1800 | For drawing steel and nonferrous wires or bars of less than Dia.6.00mm under not so much stress. |
| YG6 | 14.95 | 90.5 | 1900 | For drawing steel, nonferrous alloy bars of less than Dia.20.00mm under more stress and also for drawing tubes of less than Dia.10.00mm. |
| YG8 | 14.8 | 89.5 | 2200 | For drawing steel and nonferrous bars and tubes, also for manufacturing mechanical parts, tools and wear parts. |
| YG10 | 14.5 | 88.5 | 2400 | |
| YG15 | 14.0 | 87.0 | 2800 | For drawing steel bars and tubes with a high reduction rate and for manufacturing anvils, drilling and punching and impacting. |
Goode Carbide provide most sizes of carbide drawing dies as well as customized sizes upon your requirements.
Extremely smaller nibs are available in Goode Carbide, e.g OD 2.5 X H 3 X ID 0.15, OD 3.0 X H 3 X ID 0.3...etc..jpg)
For more informations about tungsten carbide drawing dies, Please click here for downloading the catalogue (803KB)
